Single Gang Horn

Interior Horn. White Colour. Field Selectable Horn Tones.



- Lower current draw (45mA max) more devices per loop

- Universal mounting plate included

- Field-selectable horn tones ( electromechanical 3 kHz, High/Low dBA output)


-          Walk Test: TAC horns only work on "walk tests" with time durations of 4  seconds or greater.

-     Input Terminals: 12 to 18 AWG

12 or 24VDC and FWR unfiltered
Operating voltage range*
12V: 10.5-17V; 24V: 20-30V
Operating voltage range*
(with Sync Circuit module, MDL)
12V, 11-17V; 24V, 20-30V


  - Horn with universal mounting plate: 5" x 5 5/8" x 1 5/16"

  - Horn without mounting plate: 2 15/16" x 5 5/16" x 1 5/16"

 Weight: 7.7 oz

 Mounting: 4" x 4" x 1 1/2" or 2" x 4" x 1 7/8" standard boxes

 Indoor operating temperature: 32*F to 120*F (0*C to 49*C)

 Maximum Humidity: 95% as tested per UL464

 Weatherproof operating temperature: 32*F to 150*F ULC -40*C to 66*C


   TAC products offer installation ease which also lowers the installed cost. By taking up no room in the back box, TAC strobes and horn/strobes make wiring connections simpler and faster. Each TAC includes a universal mounting plate for 4" square and single gang back box mounting. Accessory mounting plates are also available for small footprint or surface mount applications.



   TAC offers the flexibility to meet a broad range of requirements. The TAC horns feature a number of field-selectable/reversible horn tones.



   To meet building owner aesthetic requirements, TAC incorporates a stylish, low profile design. And this aesthetic is consistent across all TAC wall-mount products.                    


Power Supply 12/24DC 1AMP
Comes with two 12VDC / 24VDC class 2 rated...
Timer, SPDT, 1 sec-4.25 hour
12/24VDC. Adjustable From 1 Second to Over...
Key Switch, Single Gang
DPDT momentary, with DPDT maintained contact...
Push Button, Single Gang
1-1/2 Inch Red Mushroom Button, SPDT...